Home > Exhibition > Content

Architectural scale building model made of wood materials required for the fiber board

- Jan 10, 2018 -

Architectural scale building model made of wood materials required for the fiber board


201801101541382807159.jpg



Fibreboard is wood fiber or other plant fibers as raw materials, broken, fiber separation, drying after the addition of urea-formaldehyde resin or other adhesives used, and then after the heat pressed into a man-made sheet.

     Fibreboard because of waterproofing, it's hygroscopic than wood, shape stability, anti-bacterial are better. Fiberboard by volume can be divided into hardboard, semi-hardboard and soft fiberboard, its nature and type of raw materials, manufacturing processes vary widely. Hard fiberboard bulk density of 0.8g / cm3 or more, often one side or both sides of the light, with good mechanical properties; semi-hardboard (also known as medium density fiberboard) bulk density is 0.4 ~ 0.8g / cm3; soft fiberboard The bulk density of 0.4 cm3 below.

     In the sand table model, the highest frequency of use of soft fiberboard, the surface after spray or compression molding treatment, with some decorative effect, mainly for the sand table model base, wall panels, partitions, etc., its specifications (length x width ) 2440x1220mm, the thickness of 3 ~ 30mm.


Related Industry Knowledge

Related Products

  • ABS Plastic Building House Model
  • Architectural House 3d Model Maker
  • High Detailed Architectural Scale Model Miniature For Steel Factory Park
  • Large Size Building Model With Flash Lighting ,laser Cut Architectural Models
  • Architectural 3d Print Physical Model , Scale Model Real Estate&construction Factory
  • Architectural 3d Model Factory Building Miniature For Construction&real Estate